pcv series ? proportional controller ? ratings from 15a to 90a @ 240 vac ? 2-7 v dc or 2-10 v dc analog input range ? for use with resistive loads only product selection description 15 a 25 a 50 a 75 a 90 a 2-7 vdc control 7pcv2415 7pcv2425 2-10 vdc control 10pcv2415 10pcv2425 10pcv2450 10pcv2475 10PCV2490 output specifications (1) description 15 a 25 a 50 a 75 a 90 a operating voltage (47-63hz) [vrms] 100-240 100-240 100-240 100-240 100-240 transient overvoltage [vpk] 600 600 600 600 600 maximum off-state leakage current @ rated voltage [marms] 10 10 10 10 10 minimum off-state dv/dt @ maximum rated voltage [v/sec] (2) 200 200 200 200 200 maximum load current (3) [arms] 15 25 50 75 90 minimum load current [arms] 0.15 0.15 0.15 0.15 0.15 maximum surge current (16.6ms) [apk] 150 250 625 1000 1200 maximum on-state voltage drop @ rated current [vpk] 1.6 1.6 1.6 1.6 1.6 maximum i2 t for fusing (8.3 msec) [a2 sec] 94 260 1620 4150 6000 minimum power factor (with maximum load) 0.5 0.5 0.5 0.5 0.5 input specifications (1) description 7pcv24xx 10pcv24xx control voltage range 2-7 vdc 2-10 vdc typical input current @ 5 vdc 4 ma 4 ma general specifications description parameters dielectric strength, signal to load (50/60hz) 2500 vrms dielectric strength, signal to base 2500 vrms ambient operating temperature range -30 to 80 c ambient storage temperature range -40 to 125 c weight (typical) 3.5 oz. (100g) encapsulation themaly conductive epoxy terminals screws and saddle clamps furnished, unmounted general notes 1) all param eters at 25c unless otherwise specified.
mechanical specifications wiring diagram
thermal derate information typical applications ? industrial temperature controllers ? light dimming ? vibratory feeders ? resistive heating elements ? rectified dc motors ? conveyor speed control unsuitable applications the pcv is not suitable for some load applications including, but not limited to the following: ? ac motor control ? three p has e motors ? transformers requiring pure sine wave input ? zero crossing applications please contact crydom?s application engineering department for additional information and specific application questions. agency approvals r ev. 032111
annex - enviromental information
|
